|WF - 800 RED OAK
WF - 810 WHITE OAK
WF - 820 MAPLE
WF - 830 WALNUT
WF - 840 BRAZILIAN CHERRY
USES: Precision Full Trowel Wood Filler is a waterbased wood filler
specifically designed for trowel filling cracks, holes and open grain of
PRIOR TO APPLICATION: Sand floor to bare wood according to NWFA/NOFMA
specifications. Be sure to vacuum all dirt, sawdust, etc. from cracks
before applying Precision Full Trowel Wood Filler or Precision Wood Patch.
Always wear a properly fitted mask when sanding.
Keep from freezing.
DO NOT bleach.
*Low temperatures and/or high humidity will retard drying.
APPLICATION: Apply Precision Full Trowel Wood Filler after the first
sanding of the floor. Pour a workable puddle of filler on the floor. With
a smooth edge trowel or spatula, work the filler into the cracks and holes
leaving no excess on the surface. For best results, larger cracks and
holes may need an additional application. Always allow proper drying time
DRYING TIME: 30 to 60* minutes. Once dry, proceed with sanding. For
best results, the room and the product should be between 60?F to 90?F.
Be sure to remove all excess filler from the surface of the floor.
CLEAN UP: Clean applicators and equipment using soap and water.
3.5 Gallon 1/Case
INGREDIENTS: Contains: Calcium carbonate, crystalline silica, vinyl
acetate. SPECIFIC GRAVITY: 1.4 VOC: NA
BOILING POINT: 212?F VAPOR DENSITY: NA FLASH POINT: None PERCENTILE
VOLATILE BY WEIGHT: 25-28%
FREEZE / THAW: Stable FLAMMABILITY CLASSIFICATION: Non-flammable PERCENT
STORAGE: Keep from freezing. Keep container closed while not in use.